[1] 赵晓军. 超超临界二次再热机组热力系统优化分析 [J]. 企业科技与发展, 2018(2): 95-96.

ZHAOX J. Optimization analysis of thermal system of ultra supercritical secondary reheating unit [J]. Sci-Tech & Development of Enterprise, 2018(2): 95-96.
[2] 余炎, 刘晓澜, 范世望. 二次再热汽轮机关键技术分析及探讨[J]. 热力透平, 2013(2): 69-72.

YUYAN. LIU X L. FAN S W. Analysis and discussion for key technologies of USC double reheat turbines [J]. Thermal Turbine, 2013(2): 69-72.
[3] 张勇, 甄静. 超超临界700 ℃火电机组热力系统的分析 [J]. 锅炉技术, 2015(2): 17-21.

ZHANGY, ZHENJ. Exergy of analysis for thermal power system 700 ℃ supercritical power unit [J]. Boiler Technology, 2015(2): 17-21.
[4] 朱宝田, 周荣灿. 进一步提高超超临界机组蒸汽参数应注意的问题 [J]. 中国电机工程学报, 2009, 29(增刊1): 95-100.

ZHUB T, ZHOUR C. Problems paid attention to raise the ultra supercritical units steam parameters [J]. Proceedings of the CSEE, 2009, 29(Supp.1): 95-100.
[5] 黄保平, 冷祥珠. 针对带背压式给泵汽轮机的梯级循环机组的热力性能分析 [J]. 低碳世界. 2017(34): 337-339.

HUANGB P, LENGX Z. Thermal performance analysis of cascade cycle unit with back pressure feed pump turbine [J]. Low Carbon World, 2017(34): 337-339.
[6] 曾海波, 龚自力, 陈节涛. 1 000 MW超超临界机组给水泵汽轮机转速周期性波动分析与处理 [J]. 东方汽轮机, 2021(1): 60-64.

ZENGH B, GONGZ L, CHENJ T. Analysis and treatment of periodic fluctuation of rotating speed on feedwater pump turbine for 1 000 MW ultra-supercritical unit [J]. Dongfang Turbine, 2021(1): 60-64.
[7] 王雅倩, 付亦葳, 张泽雄, 等. BEST系统变工况特性及控制方式研究 [J]. 热能动力工程, 2019, 34(5): 42-48.

WANGY Q, FUY W, ZHANGZ X. et al. Study on the off-design characteristics and control methods of BEST system [J]. Journal of Engineering for Thermal Energy and Power, 2018, 34(5): 42-48.
[8] 高展羽, 王建伟, 雷晓龙. 回热驱动式小汽轮机启动运行方案探讨 [J]. 东方汽轮机, 2019(3): 50-54+59.

GAOZ Y, WANGJ W, LEIX L. Discussion on starting operation scheme of regenerative drive type steam turbine [J]. Dongfang Turbine, 2019(3): 50-54+59.