导向架平台吸力桶基础施工过程控制关键技术

刘华全; 李元松; 潘胜平; 张鑫; 赵勇; 刘华全; 李元松; 潘胜平; 张鑫; 赵勇

doi:10.16516/j.gedi.issn2095-8676.2023.01.012

[1]

张浦阳, 黄宣旭. 海上风电吸力式筒型基础应用研究 [J]. 南方能源建设, 2018, 5(4): 1-11. DOI: 10.16516/j.gedi.issn2095-8676.2018.04.001.

ZHANG P Y, HUANG X X. Application research on suction bucket foundation for offshore wind power [J]. Southern Energy Construction, 2018, 5(4): 1-11. DOI: 10.16516/j.gedi.issn2095-8676.2018.04.001.

[2]

毋晓妮, 廖倩, 李晔. 海上风机吸力式桶形基础承载特性研究综述 [J]. 海洋技术学报, 2020, 39(1): 91-106. DOI: 10.3969/j.issn.1003-2029.2020.01.014.

WU X N, LIAO Q, LI Y. A review on the bearing capacity studies of the suction bucket foundation for offshore wind turbines [J]. Journal of Ocean Technology, 2020, 39(1): 91-106. DOI: 10.3969/j.issn.1003-2029.2020.01.014.

[3]

范荣山, 张健. 深水导管架在海上风电项目的施工方法探讨 [J]. 水电与新能源, 2020, 34(9): 32-35. DOI: 10.13622/j.cnki.cn42-1800/tv.1671-3354.2020.09.009.

FAN R S, ZHANG J. The construction of deepwater jacket foundation in far-reaching offshore wind power projects [J]. Hydropower and New Energy, 2020, 34(9): 32-35. DOI: 10.13622/j.cnki.cn42-1800/tv.1671-3354.2020.09.009.

[4]

ANDERSEN K H, JOSTAD H P. Shear strength along inside of suction anchor skirt wall in clay [C]//Anon. Proceedings of the Offshore Technology Conference, Houston, May 3-6, 2004. Houston: OTC, 2004. DOI: 10.4043/16844-MS.

[5]

HOULSBY G T, BYRNE B W. Design procedures for installation of suction caissons in clay and other materials [J]. Proceedings of the Institution of Civil Engineers-Geotechnical Engineering, 2005, 158(2): 75-82. DOI: 10.1680/geng.2005.158.2.75.

[6]

American Petroleum Institute. Design and analysis of stationkeeping systems for floating structures: API RP 2SK [S]. New York: API Publishing, 2015.

[7]

American Petroleum Institute. Geotechnical and foundation design considerations: API RP 2GEO [S]. New York: API Publishing, 2011.

[8]

DNVGL-RP-C212. Offshore soil mechanics and geotechnical engineering [EB/OL]. (2019-07-01)[2022-04-28]. https://www.document-center.com/standards/show/DNVGL-RP-C212/history/2017/A1%20EDITION.

[9]

HOULSBY G T, BYRNE B W. Design procedures for installation of suction caissons in sand [J]. Geotechnical Engineering, 2005, 158(3): 135-144. DOI: 10.1680/geng.2005.158.3.135.

[10]

SENDERS M, RANDOLPH M F. CPT-based method for the installation of suction caissons in sand [J]. Journal of Geotechnical and Geoenvironmental Engineering, 2009, 135(1): 14-25. DOI: 10.1061/(ASCE)1090-0241(2009)135:1(14).

[11]

丁红岩, 贾楠, 张浦阳. 砂土中筒型基础沉放过程渗流特性和沉贯阻力研究 [J]. 岩土力学, 2018, 39(9): 3130-3138+3146. DOI: 10.16285/j.rsm.2016.2913.

DING H Y, JIA N, ZHANG P Y. Research of seepage characteristics and penetration resistance during installation of bucket foundations in sand [J]. Rock and Soil Mechanics, 2018, 39(9): 3130-3138+3146. DOI: 10.16285/j.rsm.2016.2913.

[12]

朱儒弟, 辛海英, 高恒庆, 等. 桶形基础平台负压沉贯遥测遥控技术方案设计 [J]. 海岸工程, 1999, 18(1): 85-89.

ZHU R D, XIN H Y, GAO H Q, et al. Technological scheme design for remote detection and telecontrol of suction penetration of bucekt foundation of flatforms [J]. Coastal Engineering, 1999, 18(1): 85-89.

[13]

丁忠军, 张士华, 徐松森, 等. 桶基平台负压沉贯过程监测与控制技术研究 [J]. 海洋工程, 2010, 28(3): 102-106. DOI: 10.16483/j.issn.1005-9865.2010.03.009.

DING Z J, ZHANG S H, XU S S, et al. Research of monitoring and controlling technology during the bucket foundation platform suction penetration [J]. The Ocean Engineering, 2010, 28(3): 102-106. DOI: 10.16483/j.issn.1005-9865.2010.03.009.

[14]

李大勇, 吴宇旗, 张雨坤, 等. 砂土中桶形基础吸力值的设定范围 [J]. 岩土力学, 2017, 38(4): 985-992+1002. DOI: 10.16285/j.rsm.2017.04.009.

LI D Y, WU Y Q, ZHANG Y K, et al. Determination of suction range for penetration of suction caissons in sand [J]. Rock and Soil Mechanics, 2017, 38(4): 985-992+1002. DOI: 10.16285/j.rsm.2017.04.009.