高温气冷堆示范工程反应堆保护系统调试工具研发与应用

雷川; 程鹏; 张智军; 雷川; 程鹏; 张智军

doi:10.16516/j.gedi.issn2095-8676.2023.06.018

[1]

姚伟, 郭云生, 王岩, 等. 福清核电反应堆保护系统仿真软件开发 [J]. 核电子学与探测技术, 2015, 35(5): 468-472. DOI: 10.3969/j.issn.0258-0934.2015.05.012.

YAO W, GUO Y S, WANG Y, et al. The development of simulation software of the RPR system of Fuqing nuclear power plant [J]. Nuclear electronics & detection technology, 2015, 35(5): 468-472. DOI: 10.3969/j.issn.0258-0934.2015.05.012.

[2]

鄢小安, 张知行. 基于LABVIEW的振动数据采集与分析系统设计 [J]. 林业机械与木工设备, 2021, 49(10): 18-24,31. DOI: 10.3969/j.issn.2095-2953.2021.10.003.

YAN X A, ZHANG Z X. Design of vibration data acquisition and analysis system based on LABVIEW [J]. Forestry machinery & woodworking equipment, 2021, 49(10): 18-24,31. DOI: 10.3969/j.issn.2095-2953.2021.10.003.

[3]

韩强. 基于PCI Express总线架构的多处理器模块设计 [J]. 信息通信, 2018(5): 137-139. DOI: 10.3969/j.issn.1673-1131.2018.05.065.

HAN Q. Design of a multi-processor module based on the PCI Express bus architecture [J]. Information & communications, 2018(5): 137-139. DOI: 10.3969/j.issn.1673-1131.2018.05.065.

[4]

贾宏宇. 基于NI数采模块的测井数据采集控制系统 [J]. 仪表技术, 2004(5): 15-16. DOI: 10.3969/j.issn.1006-2394.2004.05.003.

JIA H Y. A well logging data acquisition and control system based on NI DAQ modules [J]. Instrumentation technology, 2004(5): 15-16. DOI: 10.3969/j.issn.1006-2394.2004.05.003.

[5]

李红霞, 霍雨佳, 陈静, 等. 保护测量通道响应时间自动测试功能设计 [J]. 核动力工程, 2015, 36(2): 66-67. DOI: 10.13832/j.jnpe.2015.02.0066.

LI H X, HUO Y J, CHEN J, et al. Functional design for online automatic test of response time in protection and measurement channels [J]. Nuclear power engineering, 2015, 36(2): 66-67. DOI: 10.13832/j.jnpe.2015.02.0066.

[6]

王海稳, 曲俊海, 夏明. 高性能控制系统调试装置 [J]. 电脑开发与应用, 2005, 18(7): 38-39. DOI: 10.3969/j.issn.1003-5850.2005.07.019.

WANG H W, QU J H, XIA M. High performance control system debugging device [J]. Computer development & applications, 2005, 18(7): 38-39. DOI: 10.3969/j.issn.1003-5850.2005.07.019.

[7]

郝丽, 赵伟. 基于LabVIEW实现信号模拟输出的两个关键问题 [J]. 电气电子教学学报, 2010, 32(3): 16-19. DOI: 10.3969/j.issn.1008-0686.2010.03.007.

HAO L, ZHAO W. The discussion of two key issues in analog output with LabVIEW [J]. Journal of electrical & electronic education, 2010, 32(3): 16-19. DOI: 10.3969/j.issn.1008-0686.2010.03.007.

[8]

卢献军, 黄成强. 数控系统中“位置偏差过大”报警信号的分析与处理 [J]. 职业, 2008(3): 78. DOI: 10.3969/j.issn.1009-9573.2008.03.050.

LU X J, HUANG C Q. Analysis and processing of "excessive position deviation" alarm signal in numerical control system [J]. Occupation, 2008(3): 78. DOI: 10.3969/j.issn.1009-9573.2008.03.050.

[9]

汪绩宁, 周爱平, 郄永学, 等. 核电厂反应堆保护系统紧急停堆响应时间分析及测试 [J]. 核动力工程, 2012, 33(2): 5-10. DOI: 10.3969/j.issn.0258-0926.2012.02.002.

WANG J N, ZHOU A P, QIE Y X, et al. Analysis and test of respond time of nuclear power plant digital control system to reactor trip [J]. Nuclear power engineering, 2012, 33(2): 5-10. DOI: 10.3969/j.issn.0258-0926.2012.02.002.

[10]

刘洋, 廖良记, 张向科. 数字化反应堆保护系统响应时间的评价方法研究 [J]. 中国核电, 2020, 13(5): 606-610. DOI: 10.12058/zghd.2020.05.606.

LIU Y, LIAO L J, ZHANG X K. A response time evaluation method of reactor protection system implemented by DCS [J]. China nuclear power, 2020, 13(5): 606-610. DOI: 10.12058/zghd.2020.05.606.

[11]

薛得凤. 基于图形化编程语言Labview的一种虚拟仪器的实现 [J]. 自动化与仪器仪表, 2003(5): 24-26. DOI: 10.3969/j.issn.1001-9227.2003.05.009.

XUE D F. One virtual instrument based on Labview [J]. Automation and instrumentation, 2003(5): 24-26. DOI: 10.3969/j.issn.1001-9227.2003.05.009.

[12]

尤兵. 福清核电数字化反应堆保护系统T2试验装置的开发 [J]. 中国核工业, 2017(增刊1): 261-268. DOI: 10.3969/j.issn.1007-8282.2017.z1.036.

YOU B. Development of T2 test device for Fuqing nuclear power digital reactor protection system [J]. China nuclear industry, 2017(Suppl. 1): 261-268. DOI: 10.3969/j.issn.1007-8282.2017.z1.036.

[13]

郭洁, 王召巴. 基于LabVIEW的串行通信接口设计与实现 [J]. 机械工程与自动化, 2008(5): 57-59. DOI: 10.3969/j.issn.1672-6413.2008.05.021.

GUO J, WANG Z B. Design and realization of serial communication interface based on LabVIEW [J]. Mechanical engineering & automation, 2008(5): 57-59. DOI: 10.3969/j.issn.1672-6413.2008.05.021.

[14]

高丽珍, 张晓明. 基于PXI总线高速数据采集板的设计 [J]. 科技情报开发与经济, 2006, 16(19): 204-205. DOI: 10.3969/j.issn.1005-6033.2006.19.120.

GAO L Z, ZHANG X M. Design of high-speed data acquisition board based on PXI bus [J]. Sci-tech information development & economy, 2006, 16(19): 204-205. DOI: 10.3969/j.issn.1005-6033.2006.19.120.

[15]

李玲. 智能分析仪器串口通信软件的设计与实现 [D]. 西安: 西北大学, 2010. DOI: 10.7666/d.y1678857.

LI L. Design and implementation of serial communication software for intelligent analytical instruments [D]. Xi′an: Northwest University, 2010. DOI: 10.7666/d.y1678857.

[16]

施雅婷, 郭前岗, 周西峰. 一种改进的LabVIEW串口通信系统的实现 [J]. 电子测试, 2010(8): 64-69. DOI: 10.3969/j.issn.1000-8519.2010.08.013.

SHI Y T, GUO Q G, ZHOU X F. Implementation for improved serial communication system based on LabVIEW [J]. Electronic test, 2010(8): 64-69. DOI: 10.3969/j.issn.1000-8519.2010.08.013.

[17]

华能山东石岛湾核电有限公司, 华能集团技术创新中心有限公司. 一种用于高温气冷堆安全级控制系统的自动化调试装置: 201922181598. X [P]. 2020-12-15.

Huaneng Shandong Shidao Bay Nuclear Power Development Co., Ltd. , Huaneng Group Technology Innovation Center. An automated debugging device for safety-grade control system of high-temperature gas-cooled reactor: 201922181598. X [P]. 2020-12-15.

[18]

丁巧芳. 计算机串口信号采集卡的制作 [J]. 产业与科技论坛, 2017, 16(13): 48-49. DOI: 10.3969/j.issn.1673-5641.2017.13.026.

DING Q F. Production of computer serial port signal acquisition card [J]. Industrial & science tribune, 2017, 16(13): 48-49. DOI: 10.3969/j.issn.1673-5641.2017.13.026.

[19]

程保山. 万向轮定位技术 [J]. 机器人技术与应用, 2009(5): 35-37. DOI: 10.3969/j.issn.1004-6437.2009.05.016.

CHENG B S. Omni-wheel positioning technology [J]. Robot technique and application, 2009(5): 35-37. DOI: 10.3969/j.issn.1004-6437.2009.05.016.

[20]

宫成军, 王超然, 王旭, 等. 安全级数字化仪控系统调试创新实践 [J]. 科技视界, 2019(16): 20-21. DOI: 10.19694/j.cnki.issn2095-2457.2019.16.008.

GONG C J, WANG C R, WANG X, et al. Innovative practice of commissioning on safety class 1E digital control system [J]. Science & technology vision, 2019(16): 20-21. DOI: 10.19694/j.cnki.issn2095-2457.2019.16.008.