[1] 广东核电培训中心. 900 MW压水堆核电站系统与设备(上、下册) [M]. 北京: 原子能出版社, 2005.

Guangdong Nuclear Power Training Center. 900 MW PWR nuclear power plant system and equipment (part I and part II) [M]. Beijing: Atomic Energy Press, 2005.
[2] 法国核岛设备设计、建造及在役检查规则协会. 压水堆核岛机械设备设计和建造规则: RCC-M-2007 [M]. 北京: 中国核电工程有限公司, 2007.

AFCEN. Design and conception rules for mechanical components of PWR nuclear islands: RCC-M-2007 [M]. Beijing: China Nuclear Power Engineering Co., Ltd., 2007.
[3] 法国核岛设备设计、建造及在役检查规则协会.压水堆核电站核岛电气设备设计和建造规则: RCC-E-2005 [M]. 深圳: 深圳中广核工程设计有限公司, 2005.

AFCEN. Rules for design and construction of electrical equipment for PWR nuclear island: RCC-E-2005[M]. Shenzhen: China Nuclear Power Design Co., Ltd., 2005.
[4]

Fluid Controls Institute, Inc. Control valve seat leakage: ANSI FCI 70-2-2006 [S]. Ohio: Fluid Controls Institute, Inc., 2006.
[5] 陈刚, 王志敏, 张宗列. 比例喷雾阀的研制 [J]. 阀门, 2011(4): 14-15+24. DOI: 10.16630/j.cnki.1002-5855.2011.04.014.

CHENG, WANGZ M, ZHANGZ L. Development of pressurizer spray control valve [J]. Valves, 2011(4): 14-15+24. DOI: 10.16630/j.cnki.1002-5855.2011.04.014.
[6] 祁崇可. 核电厂稳压器喷雾阀阀芯结构和等百分比流量特性补偿研究 [D]. 兰州: 兰州理工大学, 2016.

QIC K. The disc structure and equal percentage flow characteristic analysis of pressurize spray valve of nuclear power plants [D]. Lanzhou: Lanzhou University of Technology, 2016.
[7] 施宝新. 核一级稳压器喷雾阀特性分析与结构设计 [J]. 阀门, 2019(6): 10-12+15. DOI: 10.16630/j.cnki.1002-5855.2019.06.003.

SHIB X. Characteristic analysis and structure design of nuclear class1 pressure regulator spray valve [J]. Valves, 2019(6): 10-12+15. DOI: 10.16630/j.cnki.1002-5855.2019.06.003.
[8] 陆培文. 控制阀实用技术 [M]. 北京: 机械工业出版社, 2007.

LUP W. Practical valve design manual [M]. Beijing: China Machine Press, 2007.
[9] 杨源泉. 阀门设计手册 [M]. 北京: 机械工业出版社, 1992.

YANGY Q. Valve design manual [M]. Beijing: China Machine Press, 1992.
[10] 杨化飙. 稳压器喷雾阀流动规律与安全分析 [D]. 上海: 上海交通大学, 2013.

YANGH B. Flow law and safety analysis of spray valve of pressurizer [D]. Shanghai: Shanghai Jiao Tong University, 2013.
[11] 薛阳, 林静, 李媛, 等. 基于自抗扰的核电站稳压器压力控制研究 [J]. 计算机仿真, 2014, 1(1): 127-131. DOI:  10.3969/j.issn.1006-9348.2014.01.029.

XUEY, LINJ, LIY, et al. Research on pressure control of pressurizer at nuclear power plant based on active disturbances rejection controller [J]. Computer Simulation, 2014, 31(1): 127-131. DOI:  10.3969/j.issn.1006-9348.2014.01.029.
[12] 张国铎, 杨旭红, 卢栋青, 等. 核反应堆稳压器水位和压力控制系统研究 [J]. 化工自动化及仪表, 2013, 40(1): 35-38+42. DOI:  10.3969/j.issn.1000-3932.2013.01.011.

ZHANGG D, YANGX H, LUD Q, et al. Research on water level and pressure control system of nuclear reactor regulator [J]. Control and Instruments in Chemical Industry, 2013, 40(1): 35-38+42.DOI:  10.3969/j.issn.1000-3932.2013.01.011.
[13] 上海发电设备成套设计研院. 核电厂用能动机械设备的鉴定 [M]. 上海: 上海科学技术文献出版社, 2007.

Shanghai Power Equipment Reserch Institute. Qualification of active mechanical equipment used in nuclear power plants [M]. Shanghai: Shanghai Scientific & Technological Literature Press, 2007.
[14]

IEEE Standard for Qualification of Safety-Related Actuators for Nuclear Power Generating Stations and Other Nuclear Facilities: IEEE 382-2019 [S]. New York: IEEE, 2019.
[15] 中华人民共和国工业和信息化部. 工业过程控制系统用电动控制阀: JB/T 7387—2014 [S]. 北京: 机械工业出版社, 2014.

Ministry of Industry Information Technology of the People's Republic of China. Electrical control valves for industrial-process control systems: JB/T 7387—2014 [S]. Beijing: China Machine Press, 2014.
[16]

ASME. Qualification of Active Mechanical Equipment Used in Nuclear Facilities: QME-1-2017 [S]. New York: ASME, 2017.