[1] XING J, SONG D Y, WU Y X, et al. HPR1000: advanced pressurized water reactor with active and passive safety [J]. Engineering, 2016, 2(1): 79-97. DOI:  10.1016/J.ENG.2016.01.017.
[2] 刘昌文, 李庆, 李兰, 等. “华龙一号”反应堆及一回路系统研发与设计 [J]. 中国核电, 2017, 10(4): 472-477+512. DOI:  10.12058/zghd.2017.04.472.

LIU C W, LI Q, LI L, et al. Research and design of "Hualong No One"reactor and primary loop system [J]. China Nuclear, 2017, 10(4): 472-477+512. DOI:  10.12058/zghd.2017.04.472.
[3] 国家能源局. 核电厂安全重要仪表压力变送器: NB/T 20318—2014 [S]. 北京: 原子能出版社, 2014.

National Energy Administration. Pressure transmitter important to safety in nuclear power plants: NB/T 20318—2014 [S]. Beijing: Atomic Energy Press, 2014.
[4] 国家核安全局. 核动力厂设计安全规定: HAF 102—2016 [S]. 北京: 国家核安全局, 2016.

National Nuclear Safety Bureau. Nuclear power plant design safety regulations: HAF 102—2016 [S]. Beijing: National Nuclear Safety Bureau, 2016.
[5]

AREVA T. Design and construction rules for electrical components of nuclear island [S]. Paris: AFCEN, 2005.
[6] 国家能源局. 核电厂安全重要压力变送器鉴定规程: NB/T 20149—2012 [S]. 北京: 原子能出版社, 2012

National Energy Administration. Qualification procedure for pressure transmitter important to safety of nuclear power plant: NB/T 20149—2012 [S]. Beijing: Atomic Energy Press, 2012
[7]

IAEA. IAEA safety glossary: terminology used in nuclear safety and radiation protection [M]. Vienna: IAEA, 2007
[8]

LIPTAK B G. Instrument calibration in: process measurement & analysis 4th ed instrument engineer's handbook [M]. Washington D. C. : CRC Press, 2003.
[9]

HASHEMIAN H, JIANG J. Pressure transmitter accuracy [J]. ISA Trans, 2009, 48(4): 383-388. DOI:  10.1016/j.isatra.2009.04.008.
[10]

IAEA. Design of instrumentation and control systems for nuclear power plants: NO SSG-39 [S]. Vienna: IAEA, 2016
[11]

HASHEMIAN H M. Sensor performance and reliability [M]. NC: ISA, 2005.
[12]

FURGAL D T, CRAFT C M. Performance assessment of class 1E pressure transmitters subjected to environmental stresses [J]. Nuclear Engineering and Design, 1985, 89(1): 61-79. DOI:  10.1016/0029-5493(85)90143-8.
[13] 邱嗣鑫. 电容式差压变送器检测部件温度稳定性分析 [J]. 自动化与仪表, 1988(3): 27-30+56. DOI:  10.19557/j.cnki.1001-9944.1988.03.015.

QIU S X. Stabalilityanalysis of detection component of capacity differentital pressure transmitter [J]. Automation and Instrument, 1988(3): 27-30+56. DOI:  10.19557/j.cnki.1001-9944.1988.03.015.
[14]

IEEE Power and Energy Society. IEEE standard for design qualification of safety systems equipment used in nuclear power generating station: IEEE Std 627 [S]. Piscataway, NJ: IEEE, 1980.
[15]

IEEE Power and Energy Society. IEEE standard for qualification of equipment used in nuclear facilities: IEEE Std 627 [S]. Piscataway, NJ: IEEE 2019.
[16]

IEC/IEEE. Nuclear facilities-electrical equipment important to safety-qualification: 60780-323 [S]. Piscataway, NJ: IEEE/IEC, 2016.
[17]

CARFAGNO S P, GIBSON R J. Review of equipment aging theory and technology final report [R]. United States: N. P. , 1980: 341.
[18]

ANDERSON R. Qualification test report for enviromental and seismic qualification of weed instrument model DTN2010 pressure tranmitters [R]. Tennessee: Weed Instrument, 2011.
[19]

GRADIN L P. Qualification documentation review package for ametek aerospace gulton-statham products [R]. NY: Ametek Inc, 2012.
[20]

NELSON W B. Accelerated testing: statistical models, test plans, and data analysis [M]. USA: John Wiley & Sons Inc, 2004: 100.
[21]

PECK D S. Comprehensive model for humidity testing correlation [C]//IEEE. 24th International Reliability Physics Symposium, Anaheim, CA, USA, 1986. Anaheim: IEEE, 1986: 44-50.
[22]

IEC. Environmental testing - part 2-30: tests - test db: damp heat, cyclic (12 h + 12 h cycle): 60068-2-30 [S]. Geneva: IEC, 2005.
[23]

IEC. Environmental testing - part 2-6: tests - test fc: vibration (sinusoidal): 60068-2-6 [S]. Geneva: IEC, 2007.
[24]

Plant Support Engineering. Nuclear power plant equipment qualification reference manual, revision 1 [M]. California: EPRI, 2010.
[25]

IEC. Transmitters for use in industrial-process control systems - part 1 methods for performance evaluation: 60770-1 [S]. Geneva: IEC, 2010.