| [1] | 周昳鸣, 李晓勇, 陈晓庆. 海上风机支撑结构整体优化设计 [J]. 南方能源建设, 2019, 6(4): 86-92. DOI: 10.16516/j.gedi.issn2095-8676.2019.04.014. ZHOU Y M, LI X Y, CHEN X Q. Integrated design optimization of offshore support structure [J]. Southern Energy Construction, 2019, 6(4): 86-92. DOI: 10.16516/j.gedi.issn2095-8676.2019.04.014. |
| [2] | 王美, 谭阳红, 何怡刚, 等. 永磁直驱风电系统变流器开路故障诊断新方法 [J]. 太阳能学报, 2017, 38(12): 3392-3398. DOI: 10.19912/j.0254-0096.2017.12.028. WANG M, TAN Y H, HE Y G, et al. Novel diagnostic method for open-circuit fault of converter in permanent magnet direct drive wind turbine system [J]. Acta Energiae Solaris Sinica, 2017, 38(12): 3392-3398. DOI: 10.19912/j.0254-0096.2017.12.028. |
| [3] | 陈嘉豪, 裴爱国, 马兆荣, 等. 海上漂浮式风机关键技术研究进展 [J]. 南方能源建设, 2020, 7(1): 8-20. DOI: 10.16516/j.gedi.issn2095-8676.2020.01.002. CHEN J H, PEI A G, MA Z R, et al. A review of the key technologies for floating offshore wind turbines [J]. Southern Energy Construction, 2020, 7(1): 8-20. DOI: 10.16516/j.gedi.issn2095-8676.2020.01.002. |
| [4] | 李洪滨, 王义进, 陈朝富, 等. 永磁直驱风力发电机组机舱强度及模态分析 [J]. 中国工程机械学报, 2019, 17(4): 371-376. DOI: 10.15999/j.cnki.311926.2019.04.016. LI H B, WANG Y J, CHEN C F, et al. Strength and mode analysis of permanent-magnet direct-drive wind turbine nacelle [J]. Chinese Journal of Construction Machinery, 2019, 17(4): 371-376. DOI: 10.15999/j.cnki.311926.2019.04.016. |
| [5] | 刘东博, 段振云. 3 MW风力发电机机舱底盘的静强度及模态分析 [J]. 机械制造与自动化, 2011, 40(3): 153-155. DOI: 10.3969/j.issn.1671-5276.2011.03.049. LIU D B, DUAN Z Y. Analyzing static strength and mode of 3 MW wind turbine nacelle chassis with finite element method [J]. Machine Building & Automation, 2011, 40(3): 153-155. DOI: 10.3969/j.issn.1671-5276.2011.03.049. |
| [6] | 吕杏梅, 钟杰, 李秀珍, 等. 兆瓦级风电机组前机架结构强度优化设计研究 [J]. 风能, 2020(11): 98-101. DOI: 10.3969/j.issn.1674-9219.2020.11.030. LÜ X M, ZHONG J, LI X Z, et al. Research on structural strength optimization design of megawatt wind turbine front frame [J]. Wind Energy, 2020(11): 98-101. DOI: 10.3969/j.issn.1674-9219.2020.11.030. |
| [7] | 赵春雨, 柳胜举, 黄文杰, 等. 兆瓦级风力发电机组焊接型发电机转子支架优化分析 [J]. 风能, 2017(12): 78-81. DOI: 10.3969/j.issn.1674-9219.2017.12.019. ZHAO C Y, LIU S J, HUANG W J, et al. Optimization analysis of welded generator rotor support for megawatt wind turbine [J]. Wind Energy, 2017(12): 78-81. DOI: 10.3969/j.issn.1674-9219.2017.12.019. |
| [8] | 柳胜举, 赵春雨, 邹荔兵, 等. 基于ANSYS的风电机组主机吊具强度分析及优化设计 [J]. 机械, 2021, 48(8): 59-64. DOI: 10.3969/j.issn.1006-0316.2021.08.009. LIU S J, ZHAO C Y, ZOU L B, et al. Strength analysis and optimization design of the wind turbine lifting appliance based on ANSYS [J]. Machinery, 2021, 48(8): 59-64. DOI: 10.3969/j.issn.1006-0316.2021.08.009. |
| [9] | 刘松柏. 风力发电机前底架极限与疲劳强度分析与研究 [J]. 机械研究与应用, 2019, 32(5): 92-94,97. DOI: 10.16576/j.cnki.1007-4414.2019.05.028. LIU S B. Research on ultimate and fatigue strength of the front chassis of wind turbine [J]. Mechanical Research & Application, 2019, 32(5): 92-94,97. DOI: 10.16576/j.cnki.1007-4414.2019.05.028. |
| [10] | 陈方述, 阳雪兵, 石峰. 大型海上风力发电机组外部散热器支架设计 [J]. 机械工程与自动化, 2021(4): 106-107. DOI: 10.3969/j.issn.1672-6413.2021.04.040. CHEN F S, YANG X B, SHI F. Design of external radiator support for large offshore wind turbine generator system [J]. Mechanical Engineering & Automation, 2021(4): 106-107. DOI: 10.3969/j.issn.1672-6413.2021.04.040. |
| [11] | 孙红梅, 韩雪, 张明. 风电机组主机架结构优化研究 [J]. 风能, 2015(6): 64-67. DOI: 10.3969/j.issn.1674-9219.2015.06.019. SUN H M, HAN X, ZHANG M. Research on structural analysis of wind turbine mainframe [J]. Wind Energy, 2015(6): 64-67. DOI: 10.3969/j.issn.1674-9219.2015.06.019. |
| [12] | 陈方述, 康彪, 阳雪兵, 等. 风电机组机舱罩框架设计与吊装调姿过程载荷分析 [J]. 内燃机与配件, 2022(6): 35-37. DOI: 10.3969/j.issn.1674-957X.2022.06.012. CHEN F S, KANG B, YANG X B, et al. Design and load analysis on the hoisting posture adjustment of wind turbine nacelle cover frame [J]. Internal Combustion Engine & Parts, 2022(6): 35-37. DOI: 10.3969/j.issn.1674-957X.2022.06.012. |
| [13] | 韩佳, 刘金增, 赖宇阳, 等. 某大兆瓦风电机组主机架多阶段多目标优化 [J]. 计算机辅助工程, 2021, 30(1): 65-70. DOI: 10.13340/j.cae.2021.01.012. HAN J, LIU J Z, LAI Y Y, et al. Multi-objective optimization for main frame of large megawatt wind turbine [J]. Computer Aided Engineering, 2021, 30(1): 65-70. DOI: 10.13340/j.cae.2021.01.012. |
| [14] | 周向, 唐子谋, 申政, 等. 基于GL规范的直驱风力发电机结构强度及气隙变化分析 [J]. 锻压装备与制造技术, 2021, 56(3): 85-88. DOI: 10.16316/j.issn.1672-0121.2021.03.023. ZHOU X, TANG Z M, SHEN Z, et al. Analysis of structural strength and air gap change of direct-driven wind turbine based on GL specification [J]. China Metalforming Equipment & Manufacturing Technology, 2021, 56(3): 85-88. DOI: 10.16316/j.issn.1672-0121.2021.03.023. |
| [15] | 张晓琳, 刘衍选, 陈虎. 直驱型风力机组的底盘与发电机连接强度分析 [J]. 科技创新与应用, 2014(27): 38-39. ZHANG X L, LIU Y X, CHEN H. Analysis of connection strength between chassis and generator of direct drive wind turbine [J]. Technology Innovation and Application, 2014(27): 38-39. |