[1] 元国凯, 汤东升, 刘晋超, 等. 海上风电机组基础灌浆技术应用与发展 [J]. 南方能源建设, 2017, 4(1): 10-17. DOI:  10.16516/j.gedi.issn2095-8676.2017.01.002.

YUAN G K, TANG D S, LIU J C, et al. Grouting technology application and development in offshore wind farm [J]. Southern Energy Construction, 2017, 4(1): 10-17. DOI:  10.16516/j.gedi.issn2095-8676.2017.01.002.
[2] 夏中升, 沙建芳, 郭飞, 等. 超高强水泥基灌浆材料力学性能尺寸效应 [J]. 混凝土, 2021(10): 17-22. DOI:  10.3969/j.issn.1002-3550.2021.10.005.

XIA Z S, SHA J F, GUO F, et al. Size effect of mechanical properties of ultra-high strength cement-based grouting materials [J]. Concrete, 2021(10): 17-22. DOI:  10.3969/j.issn.1002-3550.2021.10.005.
[3]

SØRENSEN E V. Fatigue life of high performance grout in dry and wet environment for wind turbine grouted connections [J]. Nordic Concrete Research, 2011(44): 1-10.
[4]

LAMPORT W B, JIRSA J O, YURA J A. Grouted pile-to-sleeve connection tests [C]//OTC. Proceedings of the Annual Offshore Technology Conference, Houston, Texas, USA, April 27-30, 1987. Houston: OTC, 1987. DOI: 10.4043/5485-MS.
[5]

ARITENANG W, ELNASHAI A S, DOWLING P J, et al. Failure mechanisms of weld-beaded grouted pile/sleeve connections [J]. Marine Structures, 1990, 3(5): 391-417. DOI:  10.1016/0951-8339(90)90011-F.
[6]

WILKE F. Load bearing behaviour of grouted joints subjected to predominant bending [M]. Aachen: Shaker Verlag Gmbh, 2014.
[7]

CHEN T, WANG X, GU X L, et al. Axial compression tests of grouted connections in jacket and monopile offshore wind turbine structures [J]. Engineering Structures, 2019, 196: 109330. DOI:  10.1016/j.engstruct.2019.109330.
[8]

BILLINGTON C J, LEWIS G H G. The strength of large diameter grouted connections [C]//OTC. Proceedings of the Annual Offshore Technology Conference, Houston, Texas, USA, May 7-10, 1978. Houston: OCT, 1978. DOI: 10.4043/3083-MS.
[9]

BILLINGTON C J, TEBBETT I E. The basis for new design formulae for grouted jacket to pile connections [C]//OTC. Proceedings of the Annual Offshore Technology Conference, Houston, Texas, USA, May 5-8, 1980. Houston: OCT, 1980. DOI: 10.4043/3788-MS.
[10]

KRAHL N W. Axial strength of grouted pile-to-sleeve connections [J]. Journal of Structural Engineering, 1985, 111(4): 889-905. DOI:  10.1061/(asce)0733-9445(1985)111:4(889).
[11]

FORSYTH P, TEBBETT I E. New test data on the strength of grouted connections with closely spaced weld beads [C]//OTC. Proceedings of the Annual Offshore Technology Conference, Houston, Texas, USA, May 2–5, 1988. Houston: OTC, 1988. DOI: 10.4043/5833-MS.
[12]

BOSWELL L F, D´MELLO C. The fatigue strength of grouted repaired tubular members [C]//OTC. Proceedings of the Annual Offshore Technology Conference, Houston, Texas, USA, May 5-8, 1986. Houston: OTC, 1986. DOI: 10.4043/5307-MS.
[13] 仲伟秋, 滕丽荣. 剪力键形状对海上风电场灌浆连接段影响 [J]. 低温建筑技术, 2014, 36(3): 72-74. DOI:  10.13905/j.cnki.dwjz.2014.03.040.

ZHONG W Q, TENG L R. The shape influence of shear key on wind turbine grouted connections [J]. Low Temperature Achitecture Technology, 2014, 36(3): 72-74. DOI:  10.13905/j.cnki.dwjz.2014.03.040.
[14]

DNVGL. Support structures for wind turbines: DNVGL-ST—0126 [S]. Norway: DNVGL, 2018.
[15]

SOLLAND G, JOHANSEN A. Design recommendations for grouted pile sleeve connections [J]. Marine Structures, 2018, 60: 1-14. DOI:  10.1016/j.marstruc.2018.03.001.
[16]

LEE J, LEE K, KIM S, et al. Evaluation of fatigue strength of high-strength grouted connections subjected to unidirectionally reversible cyclic loading [J]. Ocean Engineering, 2021, 235: 109384. DOI:  10.1016/j.oceaneng.2021.109384.
[17]

SCHAUMANN P, RABA A, BECHTEL A. Fatigue behaviour of grouted connections at different ambient conditions and loading scenarios [J]. Energy Procedia, 2017, 137: 196-203. DOI:  10.1016/j.egypro.2017.10.373.
[18]

DALLYN P, EL-HAMALAWI A, PALMERI A, et al. Experimental investigation on the development of wear in grouted connections for offshore wind turbine generators [J]. Engineering Structures, 2016, 113: 89-102. DOI:  10.1016/j.engstruct.2015.11.028.